✔ The completion tape is designed to cover the cut edges of MOOSfree
✔ This significantly reduces the surface area exposed to wind and snow, preventing the elements to dislodge MOOSfree from the roof
✔ CoTexx completion tape consists of a 40 mm wide butyl adhesive tape with a thick pure copper foil laminated to one side
✔ Available in rolls or pre-cut into strips approximately 140 mm long

Each roll of MOOSfree^® strips of completion tape are included—two per 5 meters. These are sufficient for standard installations. However, for roofs with many skylights, dormers, or vents, or for hipped roofs, more end strips are needed to cover all the ends of MOOSfree^®  or cover all joints.

But this versatile combination of copper foil and butyl is also suitable for other applications on the roof. The CoTexx completion tape is available either in rolls or pre-cut into strips approximately 140 mm long, which fit perfectly with the width of MOOSfree^® .

The completion tape, which is about 1.5 mm thick, can be cut to size with a pair of sharp scissors.